(888) 665-7256 
Hole Cutter Drill, square hole cutter drill attachment
Hole Cutter Drill, square hole cutter drill attachment
4 Great reasons to buy from us:
- 4x FASTER. Cuts holes to the standard size of single and double gang sockets in less than 5 seconds.
- Heavy-duty and built to last. The is durable and performs on the most demanding job sites.
- Easily attaches to a regular drill with a universal 1/2 inch (13mm) chuck. The required drill RPM is between 1750 – 2500 and no hammer or percussion mode needed.
- You no longer need to mark up where to cut or to fix defects in drywall after cutting. Just point you are and drill your square holes.
-
It can easily cut regular and dense drywall such as QuietRock, single or double layer to a maximum depth of 1"
The attaches right to your existing drill and uses 4 blades that rapidly move back and forth to dig and saw into the wall to cut a perfectly squared-off socket hole into your drywall. It's an ingenious tool to save you tons of time and money and is especially great for people in home remodeling, electricians, and more.
The is a drill attachment that drills a 90 degrees square or rectangular hole in drywall, designed for installing sockets, light switches, and low voltage mud rings. One clever tool can turn a fiddly, annoying job into a breeze – and the is such a solution for cutting square or rectangular holes in plaster walls.
To use the is as simple as starting with a pilot hole, keeping the device level using the included spirit level on the top of it, then slowly push forward to find the channel. Once you're in the channel pull the drill to its max RPM and slowly move forward through the board. When moving forward when in the channel, you may need to slightly jiggle and wiggle the around to ensure all 4 blades of the saw remain in contact with the drywall.
The ingenious square drywall saw features a vacuum attachment that goes directly into the handle for automatic dust cleanup as your sawing, interchangeable blades to easily switch between single and double-gang sockets, a cut with exact dimensions for your needs, and more.
The requires a drill with No Load RPM between 1750 – 2500 and a universal 1/2 inch (13mm) chuck, it works with a drill driver (not impact driver) with the required RPM (not hammer or percussion), and it works on any standard drywall (single or double skin drywall to a maximum depth of 1").
The automatic square drywall saw measures 11.4" x 5.5" x 6.1", weighs 5.5 lbs, and as of now are only meant to cut into drywall, though they are currently designing blades that'll allow you to cut 90-degree holes into wood, bricks, ceramics, and more.
The comes with
- Pilot drill + 3 spirit levels to locate and level the cut whether installing the sockets vertically or horizontally.
- 6 quick-release blades to cut single and double gang holes.
- NOTE - the electrical socket boxes in the pictures are not included with your purchase.
 |
You get a full 365 days to return your item to us. If it doesn't fit, it breaks, you've changed your mind or for no reason whatsoever simply send it back to us and we'll cheerfully refund you every cent. |
|
 |
Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! |
|
 |
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. |
|
 |
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
 |
Ordering from locasdeals.com is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
- 4x FASTER. Cuts holes to the standard size of single and double gang sockets in less than 5 seconds.
- Heavy-duty and built to last. The is durable and performs on the most demanding job sites.
- Easily attaches to a regular drill with a universal 1/2 inch (13mm) chuck. The required drill RPM is between 1750 – 2500 and no hammer or percussion mode needed.
- You no longer need to mark up where to cut or to fix defects in drywall after cutting. Just point you are and drill your square holes.
-
It can easily cut regular and dense drywall such as QuietRock, single or double layer to a maximum depth of 1"
The attaches right to your existing drill and uses 4 blades that rapidly move back and forth to dig and saw into the wall to cut a perfectly squared-off socket hole into your drywall. It's an ingenious tool to save you tons of time and money and is especially great for people in home remodeling, electricians, and more.
The is a drill attachment that drills a 90 degrees square or rectangular hole in drywall, designed for installing sockets, light switches, and low voltage mud rings. One clever tool can turn a fiddly, annoying job into a breeze – and the is such a solution for cutting square or rectangular holes in plaster walls.
To use the is as simple as starting with a pilot hole, keeping the device level using the included spirit level on the top of it, then slowly push forward to find the channel. Once you're in the channel pull the drill to its max RPM and slowly move forward through the board. When moving forward when in the channel, you may need to slightly jiggle and wiggle the around to ensure all 4 blades of the saw remain in contact with the drywall.
The ingenious square drywall saw features a vacuum attachment that goes directly into the handle for automatic dust cleanup as your sawing, interchangeable blades to easily switch between single and double-gang sockets, a cut with exact dimensions for your needs, and more.
The requires a drill with No Load RPM between 1750 – 2500 and a universal 1/2 inch (13mm) chuck, it works with a drill driver (not impact driver) with the required RPM (not hammer or percussion), and it works on any standard drywall (single or double skin drywall to a maximum depth of 1").
The automatic square drywall saw measures 11.4" x 5.5" x 6.1", weighs 5.5 lbs, and as of now are only meant to cut into drywall, though they are currently designing blades that'll allow you to cut 90-degree holes into wood, bricks, ceramics, and more.
The comes with
- Pilot drill + 3 spirit levels to locate and level the cut whether installing the sockets vertically or horizontally.
- 6 quick-release blades to cut single and double gang holes.
- NOTE - the electrical socket boxes in the pictures are not included with your purchase.
|
You get a full 365 days to return your item to us. If it doesn't fit, it breaks, you've changed your mind or for no reason whatsoever simply send it back to us and we'll cheerfully refund you every cent. |
|
|
Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! |
|
|
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. |
|
|
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
|
Ordering from locasdeals.com is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
Related Products
